MULTIPROGRAM MODE PAYMENT SYSTEM
RECOVERING CREDITS AFTER A POWER CUT
When a power cut occurs on the jet wash while a program is running, the credits available are lost and there is no
way to recover them.
WASH PROGRAMS
The jet wash has six pre-set wash sequences . These can all be modified using the IWManager program
.
Touch-
screen KTP400 does not allow you to configure the wash sequences in Multiprogram mode.
Pre-set program sequences:
SEQUENCE
PROGRAMS
DEFINITION
1
P2(180 s) + P5(240 s)
180 seconds of shampoo wash with cold water at high pr 240
seconds of rinsing with cold water at high pressure.
2
P1(180 s) + P5(240 s)
180 seconds of shampoo wash with hot water at high pr 240
seconds of rinsing with cold water at high pressure.
3
P3 (240 s) + P5(240 s)
240 seconds of hot foam with brush + 240 seconds of rinsing with cold
water at high pressure.
4
P2 (180 s) + P4(240 s) +
P5(240s)
180 seconds of shampoo wash with cold water at high pr 240
seconds of cold foam with brush + 240 seconds of rinsing with cold water
at high pressure.
5
P2 (180 s) + P4(240 s) +
P5(240s) + P6(180 s)
180 seconds of shampoo wash with cold water at high pr 240
seconds of cold foam with brush + 240 seconds of rinsing with cold water
at high pr 180 seconds of waxing with hot water at low pressure.
6
P1 (180 s) + P4(240 s) +
P5(240s) + P6(180 s)
180 seconds of shampoo wash with hot water at low pr 240
seconds of cold foam with brush + 240 seconds of rinsing with cold water
at high pr 180 seconds of waxing with hot water at low pressure.
19
Summary of Contents for 4CA2000
Page 58: ... ...
