MULTIPROGRAM MODE PAYMENT SYSTEM
NAYAX PAYMENT SYSTEM
The Codax system is payment method which uses codes. To activate a wash sequence, first acquire a code from
the car-wash office.
1
ENTER CODE
1
2
3
E
4
6
0
7
9
*
5
8
PSD-
C
ODAX
1) The code acquired is then entered using the Codax system number
keys.
2) Validate the code by pressing "E"; the jet wash automatically starts the
selected wash sequence.
2
SELECT WASH SEQUENCE
1) Take the gun or lance out of holder.
2) Press the corresponding program sequence using the program selection
buttons; the wash bay will start working.
•
During the wash, the display shows the program in progress and the
time remaining for each program in the sequence.
•
If the lance or the gun have to be changed for a brush or vice versa,
the display will also indicate it.
3)
When the wash is finished, leave the gun or the lance in their
corresponding holders.
3
STOP WASH
1) To stop the washing process, press STOP once.
•
When STOP is pressed, the wash stops but the time continues to
count down.
2) To resume the wash, press STOP again. The message ‘TO CONTINUE,
PRESS THE STOP BUTTON’ will be shown on the display.
•
The wash will continue in the corresponding phase depending on the
time elapsed.
18
Summary of Contents for 4CA2000
Page 58: ... ...
