MEASUREMENT AND ASSEMBLY MANUAL
Manual validity: 01.02.2015
9
10. MAINTENANCE
It is recommended to carry out regular maintenance of the roller blind every two years. No maintenance activities are
expected to be done by the user, except for fabric cleaning, if necessary.
FABRIC CLEANING
Fabric
Cleaning
SATIN, SATINÉ BLACKOUT, SCREEN NATURE,
SATINÉ METAL, SCR3005
Clean with a brush, or wipe with a cloth damped in a
solution of water and a neutral detergent. Do not scrub by
force.
SOLTIS 92
Wipe with a cloth damped in a solution of water and a
neutral detergent. Do not use alcohol-based stain
removers. Do not scrub by force.
SCREEN ZIP
DEFECT
POSSIBLE CAUSE
SOLUTION
Fabric does not roll properly;
side displacement of fabric
Uneven fabric thickness
(manufacturing defect of the fabric).
Apply a distance layer (e.g. adhesive
tape) directly onto the winding drum, on
the side opposite to where the fabric is
moving.
Repeat
applying
further
adhesive tape layers until the defect is
completely removed.
Drum cover displacement.
If there is no gap at the end covers for
the fold, or if drum cover is used, open
the box and make sure there is no
displacement to either side. If so,
ensure centring.
Fabric is not centred in guide rails.
Open the box and check is the fabric is
centred with respect to the two guide
rails.
Roller blind is not rectangular.
Series Z roller blinds have very low
tolerance, thus perfect alignment is vital
for the proper function. Check the roller
blind for deformation and whether it is
installed at right angles. Check any
unevenness of walls or other supporting
elements which can cause deformation
between two sides of the structure. Use
distancing elements if necessary.
Roller blind does not draw up
fully
Winding drum axis is disconnected
from the support.
Remove the box and check proper
connection of the winding drum.