MEASUREMENT AND ASSEMBLY MANUAL
Manual validity: 01.02.2015
4
5. UNPACKING
The SCREEN ZIP ECO
system is supplied partially assembled, only the guide rails and accessories are packed
separately. After removing the packaging material, check the roller blind for completeness and eventual visible damage to
the components (upper box, guide rails. etc.). If unsure,
do not use the roller blind
and contact the seller.
NOTE: The packaging contains a box with accessories. All packaging materials (plastic sacks, polystyrene foam, nails,
screws, wooden elements, etc.) are potentially dangerous, and must therefore be kept out of the reach of children.
6. INSTALLATION
Installation may only be carried out by qualified persons capable of adhering to all instructions stated below with full
consideration of their safety and that of all other persons.
The main activities include:
1) Preparation of walls, ceilings, windows or other structures for the installation of roller blinds while using portable drills
and screwdrivers;
2) Roller blind installation to a frame or wall;
3) Connection to power mains;
4) Adjustment (of end stops / motor limit switches, etc.) and testing of the roller blind.
PREPARING THE ROLLER BLIND FOR INSTALLATION
Prior to installing the roller blind, check whether the surface of the installation place is not damaged and if it is suitabl e for
installation. Select suitable attachment screws (type and dimensions) corresponding to the type of structure onto which the
roller blind is to be installed (wood, cement, brick, etc.).
NOTE: Faulty installation can lead to accidents. Observe instructions for the proper roller blind installation to prevent the
risk of separation of the roller blind from a wall or window. ISOTRA a. s. shall not be held responsible for defects caused
by faulty installation.
ROLLER BLIND INSTALLATION
The roller blind can be installed using two different methods:
1.
Direct installation to guide rails, attached to the window frame (the guide rails are supporting elements of the roller
blind);
2.
Direct installation to guide rails, attached to the wall (the guide rails are supporting elements of the roller blind).