MEASUREMENT AND ASSEMBLY MANUAL
Manual validity: 01.02.2015
2
COLOUR:
Box and guide bars:
Standard version: ral 9006 (light silver), ral 9007 (dark silver), ral 7016 (anthracite grey);
Other colours can be selected from the ral colour chart.
Plastic components cannot be painted.
2. SCOPE OF USE
The installation should be carried out in accordance with this manual in order to avoid unnecessary errors or other related
troubles.
The roller blind was designed for use in both internal and external installations. The motor is moisture-proof, with ip44
protection rating. The roller blind is not intended for use in explosive environments. The service switch should be installed
indoors. It is possible to install the switch outdoors but only with corresponding protection preventing the penetration of
water and protecting all electrical components.
Power supply:
Electric power mains 230 v ac;
Frequency 50
–60 hz;
Voltage fluctuation tolerance ±10%;
Interference level below 70 db.
Operating conditions:
Ambient temperature -
5 °c t50 °c;
Relative humidity up to 5 g/m3 and 75% (class i2);
Atmospheric conditions e11, e12, e14, e15 as per en 13561;
Wind resistance *
Motorised version
– class 3 beaufort scale 6 (max. 49 km/h);
Crank version
– class 0–2 (depends of the model).
*in case of outdoor installation: if adverse weather conditions arise, it is strongly recommended to draw the roller blind up
to the box. For motorised roller blinds, it is recommended to use a wind sensor for the automatic roller drawing to the box.
3. OPERATOR REQUIREMENTS
All activities described for the installation, maintenance, and control of the motor limit switches should only be carried out
by specialised, qualified personnel. Anyone can use the roller blinds on a daily basis.