manualshive.com logo in svg

Isoplam A201001, Use And Maintenance Manual

Share
Download
Isoplam A201001 Use And Maintenance Manual Download Page 39

Page 38 

EXTRAORDINARY MAINTENANCE

 

Proceed as follows for replacing the front rubber blade of the squeegee body: 

1. Release the hinge (6) on the front part of the squeegee.

2. Slide the rubber-pressing blades (7) outwards to free the squeegee rubber.

3. Remove the rubber (8) and replace it.

4. Proceed in reverse to replace the rubber.

ATTENTION: remember that the correct position for the front rubber is with its flat 

surface in contact with the squeegee. 

Proceed as follows for replacing the rear rubber blade of the squeegee body: 

1. Release the hinge (9) on the front part of the squeegee.

2. Slide the rubber-pressing blades (10) outwards to free the squeegee rubber.

3. Remove the rubber (11) and replace it.

4. Proceed in reverse to replace the rubber.

ATTENTION: remember that the correct position for the front rubber is with its flat 

surface in contact with the squeegee. 

ISOP

ISOPLAM S.R.L.

Via E. Mattei, 4 – Z. I. Maser (TV) – Ita

ly

   

Tel. (+39) 0423 925023  - www.isoplam.it  

Company certified

  UNI EN ISO

 

9001:2015 

Summary of Contents for A201001













































Reviews:

No comments

Brands by name

Popular brands

Load more brands