manualshive.com logo in svg

Isoplam A201001, Use And Maintenance Manual

Share
Download
Isoplam A201001 Use And Maintenance Manual Download Page 22

Page 21 

WORK 

If the above procedure doesn't produce a good result, proceed as follows: 

1. Switch the machine off via the main switch (2) on the vacuum head (bring the switch to “0”).

2. Press the button (3) on the vacuum nozzle (4).

3. Remove the vacuum hose from the hole (6) on the vacuum nozzle.

4. Switch the machine on via the main switch (2) on the vacuum head (bring the switch to “I”).

5. Close the hole on the vacuum nozzle (4) with one hand, and quickly press the button (1) on the vacuum

head 3 or 4 times.

6. Switch the machine off via the main switch (2) on the vacuum head (bring the switch to “0”).

7. Press the button (3) on the vacuum nozzle (4).

8. Insert the vacuum hose in the hole (6) on the vacuum nozzle.

9. Recommence work.

If the above procedure doesn't produce a good result, proceed as indicated in the “

INSUFFICIENT 

VACUUM

” section in “

TROUBLESHOOTING

”. 

ISOP

ISOPLAM S.R.L.

Via E. Mattei, 4 – Z. I. Maser (TV) – Ita

ly

   

Tel. (+39) 0423 925023  - www.isoplam.it  

Company certified

  UNI EN ISO

 

9001:2015 

Summary of Contents for A201001













































Reviews:

No comments

Brands by name

Popular brands

Load more brands