Page 11
PREPARING THE MACHINE
2. Free the vacuum head from the collection tank by releasing the hooks (1) on the side of the tank. Rotate
the levers as shown by the arrow in the picture on the right.
6. Use the handle (2) on the vacuum head unit to remove it from the collection tank.
7. Rest the head carefully on the ground.
8. Insert the nylon filter (3) in the tank. To fix it in place, stick it to the edge of the tank opening.
ATTENTION: the nylon filter must only be used together with the filter/float kit or the
permanent fabric filter.
11. INSERTING THE PERMANENT FABRIC FILTER (OPTIONAL)
To insert the permanent fabric filter in the collection tank, proceed as follows:
1. Make sure the machine is in a safe condition (read “
”).
ATTENTION: you are advised to always wear protective gloves, to avoid the risk of
serious injury to your hands.
2. Free the vacuum head from the collection tank by releasing the hooks (1) on the side of the tank. Rotate
the levers as shown by the arrow in the picture on the right.
ISOP
ISOPLAM S.R.L.
Via E. Mattei, 4 – Z. I. Maser (TV) – Ita
ly
Tel. (+39) 0423 925023 - www.isoplam.it
Company certified
UNI EN ISO
9001:2015
