Isoplam A201001, Use And Maintenance Manual

Page: 24 / 44

Page 23
DAILY MAINTENANCE
PERFORM ALL MAINTENANCE OPERATIONS IN SEQUENCE
18. EMPTYING THE COLLECTION TANK
To remove solid waste from the collection tank, proceed as follows:
1. Take the machine to the designated recovery tank drainage place.
2. Make sure the machine is in a safe condition (read “ MACHINE SAFETY ”).
ATTENTION: you are advised to always wear protective gloves, to avoid the risk of
serious injury to your hands.
3. Free the vacuum head from the collection tank by releasing the hooks (5) on the side of the tank. Rotate
the levers as shown by the arrow in the picture on the right.
4. Use the handle (2) on the vacuum head unit to remove it from the collection tank.
5. Rest the head carefully on the ground.
6. Using the handle, rotate the collection tank until the handle is touching the ground.
7. Remove the dirt from the collection tank.
8. Repeat the operations in reverse order to reassemble all the parts.
ATTENTION: remember to place the dirt collection container on the ground before
emptying out the dirt.
To remove liquid waste from the collection tank, proceed as follows:
1. Take the machine to the designated recovery tank drainage place.
2. Make sure the machine is in a safe condition (read “ MACHINE SAFETY ”).
ATTENTION: you are advised to always wear protective gloves, to avoid the risk of
serious injury to your hands.
ISOP ISOPLAM S.R.L.
Via E. Mattei, 4 – Z. I. Maser (TV) – Ita ly
Tel. (+39) 0423 925023 - www.isoplam.it
Company certified UNI EN ISO 9001:2015