Isoplam A201001, Use And Maintenance Manual

Page: 10 / 44

Page 9
PREPARING THE MACHINE
6. FLOAT COMPONENTS (FOR VACUUMING LIQUIDS)
The float kit components are:
1. Float
2. Sponge filter
7. VACUUM HEAD COMPONENTS
The vacuum head components are:
1. Main switch
2. Vacuum head lifting handle bar
3. Vacuum filter cleaning button
4. Power supply cable
5. Power supply cable support hook
6. Vacuum filter
8. MACHINE SAFETY
To ensure that work is carried out in the best safety conditions, proceed as follows:
1. Make sure the collection tank is empty. If this is not the case, empty it (read “ EMPTYING THE
COLLECTION TANK ”).
ATTENTION: the place designated for this purpose must comply with the current
environmental protection regulations.
2. Make sure the main switch (1) is in the idle "0" position; if not, turn it to this position.
3. Make sure the plug (2) on the power supply cable (3) is disconnected from the mains socket (4). If
necessary, disconnect it.
ATTENTION: to avoid damage to the mains, disconnect the plug (2) from the socket
(4) by pulling directly on the plug (2) rather than the cable (3).
ISOP ISOPLAM S.R.L.
Via E. Mattei, 4 – Z. I. Maser (TV) – Ita ly
Tel. (+39) 0423 925023 - www.isoplam.it
Company certified UNI EN ISO 9001:2015