ISOIL Isoflux IFX-F100, User Manual, Page: 28 / 49

28
Damping Reduces fluctuations in the display output
1 ... 255 s
Metric / Imp Use metric or imperial units for entered data
In/Output
Type Select from list ↑↓
Current out Source Off
Channel 1
System
Units Select from list ↑↓
Min Value Min. process variable (PV) value that corresponds
to 0/4 mA
Max Value Max. process variable (PV) value that corre-
sponds to 20 mA
Damping Additional smoothing of the current output, the
higher the damping factor, 1 ... 255 s
Span 0-20mA or 4-20mA
Error Defines output behaviour in the event of error
Select from list ↑↓
Hold (last value for specified time), 3.8mA,
21.0mA
Open
Collector Out Mode Yes – Pulse output on
No – Pulse output off
Pulse Value Totaliser value of selected PV at which a pulse is
generated, e.g. PV = [m3/h], Pulse Value = 10, a
pulse is output every 10 m3
0.01 ... 1000
Pulse Width Width of the pulse
30 ... 999 ms
Calc. Max This is the calculated max. number of pulses per
second., i.e. the max. pulse rate in Hz
Voltage out Source Off
Channel 1
System
Units Select from list ↑↓
Min Value Min. process variable (PV) value that corresponds
to 0v
Max Value Max. process variable (PV) value that corre-
sponds to 10v
Damping Additional smoothing of the current output, the
higher the damping factor, 1 ... 255 s
Error Defines output behaviour in the event of error
Select from list ↑↓
Frequency out Source Off
Channel 1
System
Units Select from list ↑↓
Min Value Min. process variable (PV) value that corresponds
to minimum frequency
Max Value Max. process variable (PV) value that corre-
sponds to maximum frequency
Damping Additional smoothing of the current output, the
higher the damping factor, 1 ... 255 s
Error Defines output behaviour in the event of error
Select from list ↑↓
Relay /
Optical relay
Mode Off – Permanently off
On – Permanently energised