IFX-F100
User Manual
23
Flow_Transmitter_IFX-F100_EN_2018_March_Rev.0
Use cursor keys to select
Write Flowmeter
.
Confirm by pressing <
ENTER
>.
The programmer will send setup parameters to
the flowmeter.
Use cursor keys to select
Sensor Positioning
.
Confirm by pressing <
ENTER
>.
Use cursor keys to select
Start Measurement
.
Confirm by pressing <
ENTER
>.
Sensor positioning screen: Mount transducers
with suggested spacing and use middle bar for
fine adjustment of position (central position is
desired). Observe signal-to-noise (upper bar)
and quality (lower bar). These should be of iden-
tical length.
Confirm by pressing <
ENTER
> to obtain meas-
urements (screen) or to return to menu (pro-
grammer).
Note : Numbers shown are for indication
only.
Use cursor keys to select
Start/Stop
. Confirm
by pressing <
ENTER
>.
Programmer will send the start command to the
flowmeter. When complete, process outputs
and local display (if fitted) will be active.
Programmer screen will revert to this display.
Success!
Table 4: Quick Start wizard