Iso-Tech IDM-8341 Series, Quick Start Manual

Page: 5 / 32

Power Supply
WARNING
•
AC Input voltage: 100/120/220/240 V AC, 50/60Hz
•
The power supply voltage should not fluctuate
more than 10%.
•
Connect the protective grounding conductor of the
AC power cord to an earth ground, to avoid
electrical shock.
Fuse
WARNING
•
Fuse type: 0.125AT 100/120VAC
0.063AT 220/240 VAC
•
Make sure the correct type of fuse is installed
before power up.
•
To avoid risk of fire, replace the fuse only with the
specified type and rating.
•
Disconnect the power cord before fuse
replacement.
•
Make sure the cause of a fuse blowout is fixed
before fuse replacement.
Cleaning the
Instrument
•
Disconnect the power cord before cleaning.
•
Use a soft cloth dampened in a solution of mild
detergent and water. Do not spray any liquid.
•
Do not use chemicals containing harsh material
such as benzene, toluene, xylene, and acetone.
Operation
Environment
•
Location: Indoor, no direct sunlight, dust free,
almost non-conductive pollution (Note below)
•
Humidity: 0~35°C: < 80%RH
>35°C: <70%RH
•
Altitude: < 2000m
•
Temperature: 0°C to 50°C
(Note) EN 61010-1:2010 specifies the pollution
degrees and their requirements as follows. The IDM-
8342/8341 falls under degree 2.
Pollution refers to “addition of foreign matter, solid,
liquid, or gaseous (ionized gases), that may produce