iSMA-B-MINI/MIX BACnet User Manual
www.ismacontrolli.com
DMP261en | 1st Issue rev. 8 | 05/2022
page 66 of 114
•
•
•
•
9.3.2 Digital Inputs
This page allows for entering the configuration parameters and showing the actual value
of the digital inputs. To open this page, please navigate to the Local I/O tab and choose
Digital Inputs from the submenu.
Figure 47. The MIX38-IP Digital Inputs page
The Digital Input table contains the following fields:
State (read-only): actual input state
Reset Flag (read/write): reset of pulses value (leaving reset active will reset the value of
the pulses);
Counter State (read-only): the actual value of pulses saved in EEPROM;
Counter State To Set (read/write): allows for setting the value of the counter.
9.3.3 Digital Outputs
This page allows for entering the configuration parameters and showing the actual value
of the digital outputs. To open this page, please navigate to the Local I/O tab and choose
the Digital Outputs from the submenu.
WARNING!
To save changes, please use the
“Submit”
button
.
WARNING!
To save changes, please use the
“Submit”
button
.
