background image

3

© Island Pellet Stoves 2016

Lundy 5kW Operation Manual - 19.02.16

Thank you for choosing an advanced pellet stove system from Island Pellet Stoves. We take pride 

in our products and if there is anything we can do to help or any feedback you have then please get 

in touch.

 

OPERATING INSTRUCTIONS

All national and local regulations and European Standards shall be complied with when operating 

the appliance.

C ONTROLLER AND SE TTINGS

The stove uses a touch display, which has been designed intuitively to enable ease of use.

The stove can also use an infrared remote control intended for day-to-day use when the combustion 

system is fully configured and operational. It is used for modifying the burning power and temperature 

settings, and enables you to turn the combustion system on or off. The remote control is optional.

At the top of the stove’s display are located indicators for various alarms, timer mode operation, and 

menus. The infra-red sensor is used for remote control unit.

The display shows the set or current values for the currently selected menu option. With on screen 

buttons you can navigate through the menu and control the operation of the stove. Refer to page 4 

for descriptions of the buttons.

The keyboard is also equipped with the beeper, which provides the keyboard feedback signals. The 

following sound signals are available:

•  Short high tone: sounds when navigating the menu and editing the settings
•  Long low tone: sounds in case of an invalid operation (wrong button pressed) 
•  Long high tone: in case of an alert, this tone sounds with the user defined loudness, and 

in  case of an error, this tone sounds with 100% loudness.

The display automatically switches to idle mode after 30 seconds of inactivity and exits from it when 

the display is touched again. You can change this feature in the ‘Display Settings’ sub menu.

1 - Ambient Light Sensor

2 - Remote Sensor

3 - Touch Screen Display

4 - Display Frame 

Fig. 1 - Display & Remote Control

1
2

4

3

Increase/Decrease

Temperature

Increase/Decrease

Burning Power

Power ON/OF

F

Summary of Contents for LUNDY5















Reviews: