Island stoves LUNDY5, Basic Operation Manual

Page: 10 / 14

10
© Island Pellet Stoves 2016 Lundy 5kW Operation Manual - 19.02.16
ALER TS & FAULTS
Any faults will pop up on the display, Alerts will appear in yellow and Errors will appear in red. The
stove should still be operational in the event of an Alert, however an Error indicates a more serious
malfunction. You can close Alerts and Errors by tapping the ‘X’ symbol in the corner returning you to
the main screen, this will not reset the fault. You will notice the Alert / Error code will be at the top of
the display, tapping on this code will bring up the fault message again.
Below is a table of all the faults, their description and a suggested solution.
Code Description Solution
A001 Low fuel Refill the stove fuel container
A002 Maintenance Call out service personnel
A003 Cleaning Chimney or heat exchanger cleaning required
A004 Low battery Replace remote battery, call service to order
replacement (CR2032 recommended)
A005 Speed sensor Call out service personnel
A006 Door opened Ensure door is closed properly
A007 Pressure / airflow sensor Call out service personnel
E002 IR communication error Call out service personnel
E004 MB communication error Call out service personnel
E101 Fire Error Call out service personnel
E102 Chimney Dirty Chimney cleaning required
E105 NTC2 Call out service personnel
E106 NTC3 Call out service personnel
E107 TC2 Call out service personnel
E108 Security switch error Call out service personnel
E109 Pressure switch error Call out service personnel
E110 NTC1 Call out service personnel
E111 TC1 Call out service personnel
E113 Gases over temperature Chimney or heat exchanger cleaning required
E114 No pellets Empty the burning pot and restart the device,
re-fill the fuel container if needed
E115 General error Call out service personnel
TEC HNICAL SUPPOR T
In the event of a fault, contact the organisation from whom you purchased the stove or look at Island
Pellet Stoves website for support details.