Page
8
Installing the Door Panel
Figure 6
To install the Door Panel on the Enclosure:
1.
Position the door at 90° – 100° of enclosure. (STEP 1)
2.
Slide top hinge pin onto fixed hinge post at top of door. (STEP 2)
3.
Slide lower hinge pin toward lower spring hinge mechanism with hinge pin lever in retract position. (STEP 3)
4.
With lower hinge pin in position, turn hinge pin lever outward and down, then turn inward to the extend lock position.
(STEP 4)
Installing Flush Door Trim
Figure 7
Prior to installing Door Trim, ensure that wall finishes are
complete and that the door panel has been installed.
To install the Flush Door Trim:
1.
With the door in the open position, slide flush door
trim over enclosure. See Figure 7.
2.
Align holes on enclosure with upper and lower holes
in door trim.
3.
Insert four (4) 12-24 (provided) screws through
enclosure panel and tighten into door trim.
Notes:
Holes in enclosure are slotted to allow installer to
adjust trim to wall finish.
Flush Trim adds 3 ½” to both Height and Width
of Wall Surface dimensions.
Summary of Contents for RLA Series
Page 5: ...Page 5...
