20 - 23
3-2 Refilling lubricant
Always keep the oil level between HIGH mark and LOW mark. If the oil level falls below
LOW mark, the lubrication unit will send an alarm signal to the control unit of the machine.
Remove the cap (Fig. 3) and refill with new clean oil.
Warning!
Never use used oil
4
Maintenance
iSHAN centralized lubrication system is easy to maintain. The reservoir must be cleaned
before installation and in service time so clean the reservoir regularly. If there is any
impurity or oil sludge found at the bottom of reservoir or on the strainers of the lubrication
unit, disconnect the product from main power supply and take off the reservoir by removing
4 screws on the corners. After the reservoir is cleaned, assemble it to the lubrication unit.
5 Faults / Troubleshooting
Warning
！！
Disconnect the product from main power supply before working on it..
Warning
！！
Please do not try to repair or disassemble the lubrication unit for the faults
not listed below. You should consult and inform
iSH
AN
company at once.
