Isgus Perfect 2040, Operating Manual, Page: 27 / 198

Chapter 3 Installation 3-7
Close the Recorder
1. Align and insert on an angle the two tabs at the top of the rear case cover into
the corresponding two slots at the top of the front case cover.
2. Swing the front case cover downwards until it meets the bottom of the rear
case cover. Push the bottom of the front case cover until it engages the
locking latch on the bottom of the rear case cover.
Hint
Do not close the time recorder until you have made all electrical
connections and completed all time recorder programming.
Remove the Metal Back Plate
1. To begin removing the metal back plate, press the two locking tabs located on
the top left and right hand sides of the rear case cover (step 1).
2. Keep the locking tabs pressed in and push the metal back plate back about ½
of an inch (step 2).
3. Pull the metal back plate away from the unit (step 3).
Fig. 8: Rear view of the recorder with metal back plate