Linear units with spindle drive LES 4, 5, 6
7 / 52
April 2019
Operation
(applies only to products supplied with a motor and a suitable motor output stage or a suitable
controller, e.g. a single-axle controller)
Only if the product is assembled correctly and the motor, the tactile or inductive limit switches, the
brake and the incremental measuring system (encoder) are correctly connected to the motor output
stage/controller, will parameterisation, commissioning and operation/programming of the product (as a
fully-functioning drive system) function correctly. If the product malfunctions or you are unclear about
its operational status, you should consult the relevant operating instructions/assembly instructions.
https://www.isel.com/en/support-downloads/manuals.html
Here you will find instructions and information on how to check the functions you require, remove the
causes of a possible malfunction or have these removed.
You must always carry out the instructions you find completely and correctly in order to ensure the
product functions correctly.
Never allow children or other persons who are vulnerable or at risk to operate the product unsuper-
vised.
