IGEPv2 BOARD HARDWARE USER MANUAL v1.20
ISEE 2007 SL. All rights reserved, IGEP® is a registered trademark from ISEE 2007 SL. The following is
provided for informational purposes only.
DOCUMENT FROM ISEE 2007 S.L. MAN-PR-IGEP.0020-001.20.HW_RC 10/1/2010
12
DVI-D Connector
The IGEPv2 BOARD can drive a LCD panel equipped with a DVI-D digital input. This
is the standard LCD panel interface of the OMAP3530.
Figure 7 HDMI connector
DDC2B (Display Data Channel) or EDID (Enhanced Display ID) support over I2C is
provided in order to allow for the identification of the LCD monitor type and
settings.
The IGEPv2 BOARD does not support the full HDMI interface and is used to provide
the DVI-D interface portion only. The user must use a HDMI to DVI-D cable or
adapter to connect to a LCD monitor. A standard HDMI cable can be used when
connecting to a monitor with and HDMI connector.
LCD and touchscreen header
A pair of 1.27mm pitch 2x10 headers are provided to have access to the LCD
signals and touchscreen control (IGEPv2 Revision B boards). On IGEPv2 Revision C
boards, JA41 connector is wider and enhanced with additional LCD bits depth. All
IGEPv2 boards (Revisions B and C) are mechanical, electrical and logical
compatible.
This allows for the creation of LCD boards to support different LCD panels.
microSD Connector
A microSD connector is provided for microSD cards form
factor.
The microSD memory card is the smallest memory card
available commercially, with the lowest price per capacity
and the highest capacity. At 15 mm × 11 mm × 1 mm
(about the size of a fingernail), it is about a quarter the size
of an SD card.
