iES24G Series User’s Manual
iS5 Communications Inc.
9
iES24G (2R-1F) 16 x 1000Base-T and 8 x 1000 Base-X
1.
Console port (DB9)
2.
10/100/1000Base Ethernet port
3.
100/1000Base-X Fiber port on SFP
4.
Reset button: Push the button 3 seconds for reset; 5 seconds for factory default.
5.
LED for Ethernet ports Link 100M status
6.
LED for Ethernet ports Link 100oM status.
7.
LED for SFP ports link status.
8.
Front Panel LED Status:
．
Run: System is operating continuously.
．
RMT: System is accessed remotely.
．
Fault: Indicates unexpected event occurred.
．
DEF: System resets to default configuration.
．
Ping: System is processing “PING” request.
. R.M. (Ring master): When on this switch is designated as the ring master of the Ring topology.
．
STA: When the power module is in PWR UP state, the LED is on.
．
PWR: Indicates the DC power module is activated.
．
iRing: When on, the iRing is activated.
．
PW1: Indicates the 1
st
power module is activated.
．
PW2: Indicated the 2
nd
power module is activated.
2.2
Rear Panel
The rear panel of iES24G is showed as below:
