iES24G Series User’s Manual
iS5 Communications Inc.
58
4.1.7.4
SNMP-Users
Configure SNMPv3 users table on this page. The entry index keys are Engine ID and User Name.
Label
Description
Delete
Check to delete the entry. It will be deleted during the next save.
Engine ID
An octet string identifying the engine ID that this entry should belong to.
The string must contain an even number between 10 and 64 hexadecimal
digits, but all-zeros and all-'F's are not allowed. The SNMPv3 architecture
uses the User-based Security Model (USM) for message security and the
View-based Access Control Model (VACM) for access control. For the USM
entry, the usmUserEngineID and usmUserName are the entry's keys.
In a simple agent, usmUserEngineID is always that agent's own
snmpEngineID value.
The value can also take the value of the snmpEngineID of a remote SNMP
engine with which this user can communicate. In other words, if user
engine ID equal system engine ID then it is local user;
otherwise it's remote user.
User Name
A string identifying the user name that this entry should belong to. The
allowed string length is 1 to 32, and the allowed content is the
ASCII characters from 33 to 126.
Security Level
Indicates the security model that this entry should belong to. Possible
security models are:
NoAuth, NoPriv -> No authentication and no privacy.
Auth, NoPriv -> Authentication and none privacy.
Auth, Priv -> Authentication and privacy.
The value of security level cannot be modified if entry already exists. That
means must first ensure that the value is set correctly.
