iES24G Series User’s Manual
iS5 Communications Inc.
23
Remote Port ID
The Remote Port ID is the identification of the neighbor port.
System Name
System Name is the name advertised by the neighbor unit.
Port Description
Port Description is the port description advertised by the neighbor
unit.
System Capabilities
System Capabilities describes the neighbor unit's capabilities. The
possible capabilities are:
1.
Other
2.
Repeater
3.
Bridge
4.
WLAN Access Point
5.
Router
6.
Telephone
7.
DOCSIS cable device
8.
Station only
9.
Reserved
When a capability is enabled, the capability is followed by (+). If the
capability is disabled, the capability is followed by (-).
Management
Address
Management Address is the neighbor unit's address that is used for
higher layer entities to assist the discovery by the network
management. This could for instance hold the neighbor's IP
address.
Click to refresh the page immediately.
Check this box to enable an automatic refresh of the page at
regular intervals.
LLDP Statistics
This page provides an overview of all LLDP traffic.
Two types of counters are shown. Global counters are counters that refer to the whole stack, switch, while local
counters refer to counters for the currently selected switch.
