iES20G/iES18G
Series User’s Manual
iS5 Communications Inc.
84
of work ports, this value
could not be less than
zero or be large than the
amount of member ports.
aggregator group
[GroupID] [Port-list]
static
G
Assign a static trunk
group. [GroupID] :1 to 3
[Port-list]:Member port
list, This parameter could
be a port range(ex.1-4) or
a port list separate by a
comma(ex.2, 3, 6)
switch(config)#aggregator group 1 2-4
static
or
switch(config)#aggregator group 2 1,3,4
static
show aggregator
[GroupID]
P
Show the information of
trunk group
switch#show aggregator 2
no aggregator lacp
[GroupID]
G
Disable the LACP function
of trunk group
switch(config)#no aggregator lacp 1
no aggregator group
[GroupID]
G
Remove a trunk group
switch(config)#no aggregator group 2
6.5
Commands Set List—VLAN command set
iES20G series Commands
Level Description
Example
vlan database
P
Enter VLAN configure
mode
switch#vlan database
vlan
[8021q | portbased]
V
To set switch VLAN
mode.
switch(vlan)# vlanmode 802.1q
or
switch(vlan)# vlanmode gvrp
no vlan
[VID]
V
Disable VLAN group(by
VID)
switch(vlan)#no vlan 2
Vlanmode
[disable|portbase|802.1q|gvrp]
V
Assign Vlanmode
switch(vlan)#vlanmode gvrp
IEEE 802.1Q VLAN
vlan 8021q port
[PortNumber]
access-link untag
[UntaggedVID]
V
Assign an access link for
VLAN by port; if the port
belongs to a trunk
group, this command
can’t be applied.
switch(vlan)#vlan 802.1q port 3
access-link untag 33
vlan 8021q port
[PortNumber]
V
Assign a trunk link for
VLAN by port; if the port
switch(vlan)#vlan 8021q port 3 trunk-link
tag 2,3,6,99
