iES20G/iES18G
Series User’s Manual
iS5 Communications Inc.
25
Admin Password interface
The following table describes the labels for the Admin Password screen.
Label
Description
User name
Key in the new username (The default is “
admin
”).
New Password
Key in the new password (The default is “
admin
”).
Confirm password
Re-type the new password.
Apply
Click “
Apply
” to activate the configurations.
5.1.4.3
IP Setting
You can configure the IP Settings and DHCP client function through IP configuration.
IP Configuration interface
The following table describes the labels for the IP Setting screen.
Label
Description
DHCP Client
Enables or disables the DHCP client function. When the DHCP client
function is enabled, an IP address from the network DHCP server will
be assigned to the switch. The default IP address will be replaced by
the IP address which the DHCP server. After clicking “
Apply
”, a popup
dialog shows up to inform you that the DHCP client is enabled. The
current IP will be lost and you should see the new IP address on the
DHCP server.
IP Address
Assigns the IP address that the network is using. If the DHCP client
function is enabled, you do not need to assign an IP address. The
network DHCP server will assign the IP address for the switch and it will
be displayed in this column. The default IP is 192.168.10.1.
Subnet Mask
Assigns the subnet mask of the IP address. If the DHCP client function
is enabled, you do not need to assign a subnet mask.
Gateway
Assigns the network gateway for the switch. The default gateway is
