IS5 COMMUNICATIONS iES18G Series User Manual Download Page 50

Page: 50 / 98

iES20G/iES18G

Series User’s Manual

iS5 Communications Inc.

VLAN may access the switch.

Link type

There are 3 Link Types:

Access Link:

single switch only,

allows you to group ports by setting the

same VID.

Trunk Link:

extended application of

Access Link

, which allows you to

group ports by setting the same VID with 2 or more switches.

Hybrid Link:

Both

Access

Link

and

Trunk Link

are available.

Hybrid (QinQ) Link:

enable QinQ mode, allows you to insert one more

VLAN tag on an original VLAN frame.

Untagged VID

Sets the port of the default VLAN ID for untagged devices that connect

to the port. The range is 1 to 4094.

Tagged VIDs

Sets the tagged VID’s to carry different VLAN frames to other switches.

Apply

Click “

Apply

” to activate the configurations.

5.1.8.2

VLAN Setting – Port Based

Packets can go among only members of the same VLAN group. Note all unselected ports are

treated as belonging to another single VLAN. If the port-based VLAN enabled, the

VLAN-tagging is ignored

The following table describes the labels in this screen

Label

Description

Add

Click “

add

” to enter VLAN add interface.

Edit

Edit exist VLAN

Delete

Delete exist VLAN

Help

Show help file.

Summary of Contents for iES18G Series



































































































Search results

Summary of Contents for iES18G Series

Reviews:

Related manuals for iES18G Series

Brands by name

Popular brands

IS5 COMMUNICATIONS iES18G Series, User Manual

Search results

Summary of Contents for iES18G Series

Reviews:

Related manuals for iES18G Series

Brands by name

Popular brands