IRSAP WINGS 1000, User Manual

Page: 61 / 104

61
If your remote control breaks during operation or the batteries run down, the blower will continue to operate with
the last function sent by the remote control. At the end of the previously set operation mode, the blower will work
for about 30 mins in manual function without the remote control (this is the case when, for example, you do not
change run down batteries or you do not repair the remote control).
If the batteries have run down, even after 30 minutes, when replacing them you must reset the following:
•
Time
•
Day
• Date
The other settings will remain in the memory.
CLEANING THE FILTER:
The blower has a removable dust filter on intake which catches all impurities present in the air in the room. When
the filter is dirty, the accumulated dust may block operation of the blower. So check the c leanliness of the filter
periodically (recommended at least once every month, but it depends on the environmental conditions in which
the appliance in located)..
Before taking any action to remove the filter, switch off the appliance using the switch at the back of the
blower.
Pull the filter to the right or to the left to remove it from the blower.
Every 200 working hours, the blower will remind you to clean the filter