IRSAP WINGS 1000, User Manual

Page: 55 / 104

55
Use the navigation keys (◄ ) or ( ►) to restart or to change operating mode.
OPERATION IN AUTOMATIC MODE
Press the navigation keys until the automatic symbol is outlined ,
then press OK
In this way the thermostat will follow the chosen program (pre - set or customised), depending on the time and the
on/off function.
CHOOSING THE OPERATING PROGRAMS
With AUTO function activated press the navigation keys until the symbol is outlined
then press OK.
A program will start blinking (e.g. P1).
You can choose from 3 pre - set programs: P1, P2, P3
The configuration of the existing programs is shown below:
On the time scale of the remote control display, the 24 hours of the day are represented with marking of the
phases when the blower is switched on and off. The selections are in 30 - minute steps. The days of the week are
identified with the numbers 1 to 7.