Irradian Limited
L203 Photometer
22
#
#
#
#
(continued):
Logging data to a file using Microsoft HYPERTERMINAL.EXE
1) Run the HyperTerminal programme with the correct settings as
detailed previously.
2) Set up the photometer and send the command 's' via HyperTerminal
to transmit data continuously via the RS232 connection. (‘s’ again to
stop data transmission.)
3) Go to
Transfer / Capture Text
. Enter the filename for the stored data
and the location to save to. (e.g. C:\HyperTerminal\Capture.txt).
4) Press the
start
button to store all the readings transmitted from the
photometer in a file
Capture.txt.
The status bar will now show a
highlighted 'Capture' message. The file is saved to the computer by
selecting
Transfer / Capture Text / Stop
.
5) Send the command 's' again via HyperTerminal to stop the continuous
transmission of data from the photometer.