Page 15 of 20
Maintenance Interval
Maintenance Point
Daily before operating:
Check for misalignment or binding of moving parts.
Troubleshooting
Use the table below to troubleshoot problems before contacting service personnel or your local
dealer. If the problem continues after troubleshooting, call your local dealer for assistance.
Failure
Possible Cause
Corrective Action
Saw will not start.
Cord is not connected.
Check that the cord is plugged in.
Internal damage or wear.
Have a technician service the saw.
Turn off the saw and allow it to cool.
Saw’s
performance
decreases over
time.
Accessory dull or damaged.
Keep cutting accessories sharp.
Replace as needed.
Carbon brushes worn or damaged.
Have a qualified technician replace
brushes.
Saw is
overheating.
Forcing saw to work too fast.
Allow saw to work at its own rate.
Accessory misaligned.
Check and correct accessory to fence
and/or table alignment.
Summary of Contents for 61445
Page 16: ...Page 16 of 20 Parts Diagram ...
