Page 10 of 20
Installing a Blade
1. To install a blade into the saw, pull the blade release lever outward from the saw housing.
2. While holding the blade release lever outward, insert the appropriate blade into the blade slot as
far as it will go.
3. Release the blade release lever.
Adjusting the Pivoting Shoe
1. To adjust the pivoting shoe, loosen the pivoting shoe hex screws on the lower side of the saw
using the 4 mm hex key.
2. Slide the pivoting shoe in or out until it is in the appropriate position.
3. Lock the pivoting shoe in place by tightening the pivoting shoe hex screws.
4. Pull outward on the pivoting shoe to ensure it is firmly locked in place.
Fig. 6
Summary of Contents for 61445
Page 16: ...Page 16 of 20 Parts Diagram ...
