Ironton 57524, Owner'S Manual, Page: 9 / 18

Page 9 of 18
Assembly Instructions
1. Place the chain clamping mechanism in the chuck (Fig. 3) and screw from underneath using the
star screw (Fig. 4).
2. Before starting the chain sharpener, fasten it securely to a suitable surface (e.g., a work-bench) in
a suitable place (protected against dust, dry, well-lit) using M8 screws and washers (Fig. 5).
3. Make sure that the mounting plate of the chain sharpener is pushed onto the surface as far as it
will go (Fig. 6).
Before Each Use
⚠
WARNING

Always remove the battery pack before making adjustments to the equipment.

Carefully check the working condition before its use.
Operating Instructions
⚠
WARNING