Ironton 57524, Owner'S Manual, Page: 11 / 18

Page 11 of 18
a. Slacken the locking screw for setting the grinding angle.
b. Set the desired grinding angle using the scale.
c. Tighten the locking screw again.
3. Set the chain stopper (Fig. 9/10).
a. Fold the chain stopper onto the chain.
b. Pull the chain backwards against the chain stopper until the latter stops a cutting link.
c. Fold the grinding head down until the grinding wheel is touching the chain link that is to be
ground.
4. Set the depth limit (Fig. 10).
Fold the grinding head down and set the grinding depth using the setting screw.
5. Lock the chain (Fig. 7).
Tighten the chain locking screw.