Ironton 57524, Owner'S Manual, Page: 13 / 18

Page 13 of 18
Charging the Lithium Battery Pack
The battery is protected from exhaustive discharge. An integrated protective circuit automatically
switches off the equipment when the battery is flat.
1. Remove the battery pack from the handle, pressing the push lock button downwards to do so.
2. Check that your main voltage is the same as that marked on the rating plate of the battery
charger. Insert the power plug of the charger into the socket outlet. The green LED will
then begin to flash.
3. Push the battery pack onto the battery charger.
After Each Use
⚠
WARNING

Remove the battery each time before cleaning.

Keep all safety devices, air vents and the motor housing free of dirt and dust as far as possible.

Do not use cleaning agents or solvents; these could attack the plastic parts of the equipment.
Ensure that no water can seep into the device.
We recommend that you clean the device immediately each time you have finished using it. Clean
with a moist cloth and a soft soap or blow it with compressed air at low pressure.
Place unit in a dry and clean place after use.
Maintenance
⚠
WARNING

Do not use grinding wheels that are worn, broken, cracked or otherwise damaged. Use only
genuine grinding wheels.

Remove the battery each time before cleaning.