Ironton 57524, Owner'S Manual, Page: 4 / 18

Page 4 of 18
Intended Use
The Ironton 18 Volt Li-Ion Cordless Chainsaw Sharpener is designed for sharpening chainsaws.
Technical Specifications
Property Specification
Motor power supply 18 V DC
Idle speed 6500 min-1
Battery charger output voltage: 21 V DC
Battery charger output current 3 A
Charging unit supply voltage 110V~ 60Hz
Battery type Li-Ion
Adjustment angle 35° to the left and right
Grinding wheel Ø (inside) 23 mm
Grinding wheel Ø (outside) Max. 108 mm
Grinding wheel thickness 3.2 mm
Weight 3.75 Lb.
Important Safety Information
⚠
WARNING

Read and understand all instructions. Failure to follow all instructions may result in serious injury
or property damage.

The warnings, cautions, and instructions in this manual cannot cover all possible conditions or
situations that could occur. Exercise common sense and caution when using this tool. Always be
aware of the environment and ensure that the tool is used in a safe and responsible manner.

Do not allow persons to operate or assemble the product until they have read this manual and
have developed a thorough understanding of how it works.

Do not modify this product in any way. Unauthorized modification may impair the function and/or
safety and could affect the life of the product. There are specific applications for which the product
was designed.

Use the right tool for the job. DO NOT attempt to force small equipment to do the work of larger
industrial equipment. There are certain applications for which this equipment was designed. This
product will be safer and do a better job at the capacity for which it was intended. DO NOT use
this equipment for a purpose for which it was not intended.

Industrial or commercial applications must follow OSHA requirements.
⚠
WARNING
WORK AREA SAFETY

Inspect the work area before each use. Keep work area clean, dry, free of clutter, and well-lit.
Cluttered, wet, or dark work areas can result in injury. Using the product in confined work areas
may put you dangerously close to cutting tools and rotating parts.