5
Using with Super Bench and UP
Hypercore on Super Bench
: The
Superbench comes with two types
of Pull Pins. Check your personal
Super Bench and instructions for
their use in your Super Bench
Manual
Locking Lever Position with
HYPER CORE installed
Hypercore on Super Bench PRO
: Installation onto Super Bench
PRO will require the Bench to be slightly elevated for the HYPER-
CORE FOOT BASE to sit on floor.
First, raise the locking lever on your SUPERBENCH PRO to the
next locking position and insert your HPERCORE ATTACHMENT
into the Receiver Tube on the Bench. Lock into place as instruct-
ed in your Super Bench PRO manual. Next, raise your locking
lever back toward the level position until your HYPERCORE
FOOT BASE is resting on the floor. This position will keep the
locking lever between the first two notches (shown left). This is
normal and stable.
Make sure the Hypercore foot is resting on
the floor.
