2
CONTENTS:
1. 2x Thigh Pad
2. 1x Handle Frame
3. 1x Post Frame
4. 1x Foot Holder Frame
5. 1x Roller pad tube
6. 2x Foam Roller Pads
7. 1x Base Foot
1
2
3
4
6
7
5
HARDWARE KIT
1. 2x M10 x 70mm bolt
2. 5x M10 Washer
3. 2x M10 Nylon Lock Nut
4. 1x M10 x 25mm Bolt
5. 8x 5/16” x 1” bolt
6. 8x 5/16” Washer
7. 2x M8 x 15mm Allen Screw
8. 2x M8 Washer
9. 2x M8 x 20 Dome cap Allen Head Bolt
10. 2x Plastic Foam Roller End caps
11. 2x M8 Plastic End Cap Washers
1
2
3
5
8
4
7
6
9
10
For customer service, contact your local
distributor or:
Ironmaster LLC,14562 167th Ave SE Monroe, WA
98272 USA
Web site: www.ironmaster.com Email: sup-
[email protected]
Tel: 800-533-3339 or 1-360-217-7780
The following instructions will help you assemble the unit and provide some details on use as well.
The only tools required are two adjustable wrenches and a 6mm Allen Wrench (Included with Hard-
ware kit). Check prior to Assembly that parts from both the main box and hardware kit are all present.
Warranty Information:
Ironmaster warrants to the original purchaser that this Home Fitness Product will be free from defects in workmanship and materials for a specific period from date of
purchase based on the part type listed below. During the warranty period, Ironmaster will either repair or replace, at its option, defective part(s) at no charge. Warranty
covers in home use only.
1 year for normal wear items such as rubber, upholstered parts and surface finishes.
10 years for frame and structural components.
Shipping costs are not included in the warranty and some items may need to be sent to Ironmaster for repair or replacement. Installation of any parts and labor involved is
not included. The warranties described above shall be the sole and exclusive remedy available to the purchaser. Correction of defects, in the manner and for the period of
time described above, shall constitute complete fulfillment of all liabilities and responsibilities of Ironmaster to the purchaser with respect to the product, and shall consti-
tute full satisfaction of all claims, whether based on contract, negligence, strict liability or otherwise. In no event shall Ironmaster be liable or in any other way responsible
for damages or defects in the product which were caused by repairs or attempted repairs performed by anyone other than Ironmaster or Authorized service Contractor.
This warranty shall not apply if the defect was caused by misuse, neglect or normal wear and tear of the product purchased. Nor shall Ironmaster be liable or in any way
responsible for any incidental or consequential economic or property damage. Some states do not allow the exclusion of incidental or consequential damage, so the
above exclusion may not apply to you.
11
6mm Allen Wrench
included (not shown)
