3
Congratulations on your purchase of this fine Ironmaster product. The following instructions will help
you assemble the unit and provide some details on use as well. The only tools required are two
adjustable wrenches. Unpack all the parts and make sure you have received all the parts as shown on
the parts list. If you are missing anything or have questions, please call Ironmaster right away and we
will assist you. 800-533-3339.
Step 1:
Assemble THIGH PADS to the
HANDLE FRAME as shown using 8x 5/16” Bolts and Washers.
NOTE: Screw in bolts all the way with fingers only to prevent
crossthreading. Then use wrench to tighten.
Do not over tighten.
Step 2:
Assemble HANDLE FRAME to POST FRAME
using the two M10 x 70mm bolts with 4x M10 washers
and two Nylock nuts. Use two wrenches tighten the
bolts securely.
Check for correct orientation
prior to
installation, using the completed assembly shown on
front page for reference.
1
2
Step 3
: Insert the ROLLER PAD TUBE onto FOOT HOLDER FRAME and secure with the M10
bolt and M10 washer. Next, slide ROLLER PADs onto ROLLER PAD TUBE. Finally, using 2x M8
x 20mm Allen Head bolt and 2x M8 Washer (under End Cap), secure 2x plastic End Cap onto end
of ROLLER PAD TUBE.
Do not overtighten
POST
FRAME
HANDLE
FRAME
POST FRAME
