14
Step 7
Slide the Rear Rod (9) through the large round hole
on the side of Adjustable Boom (3), and secure the
Rear Rod (9) on the Adjustable Boom (3) with a
ST4.8x20 Screw (68).
Slide two Heel Holder Brackets (7) and Rubber Heel
Holders (31) onto both ends of the Rear Rod (9) until
the lock teeth are wedged into the slots in the Rear
Rod (9), as shown in detailed drawing. Use the same
procedure to attach the other two Heel Holder
Brackets (7) and Rubber Heel Holders (31) onto the
Front Rod (11).
NOTE:
Make sure the lock teeth are wedged into the
slots in the Rear Rod (9) and Front Rod (11) to lock the
Heel Holder Brackets (7) and Rubber Heel Holders (31)
in place before use.
Hardware:
․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․
Step 8
Attach the Nylon Strap (32) to the Strap Lock (34) by inserting the end of the strap up through the
bottom of the strap lock, loop the Nylon Strap (32) over the Pre-assembled Loop Strap (33) and down
through the Strap Lock (34). Now, loop the strap back over itself, and insert back through the Strap
Lock (34), and pull tight to secure. See diagram.
19
34
33
32
19
19
33
34
32
19
1 Screw (ST4.8x20)
9
7
7
31
31
11
31
3
7
7
31
68
Multi Hex Tool with Phillips Screwdriver
Tool:
Summary of Contents for 5214
Page 5: ...4 WARNING LABEL PLACEMENT ...