23
STORAGE
FOLDING THE INVERSION TABLE
For your storage convenience, the inversion table can be folded down to place against a wall, under
a bed, or in a storage area. To fold the inversion table pull out the Spring Knob (18) and loosen
Knob (30). Now, slide the Adjustable Boom (3) all the way up into the frame, until the instep frame
is just below the Bed Frame (4), release the Spring Knob (18) and slide the Adjustable Boom (3)
slightly up or down until the Spring Knob (18) locks the Adjustable Boom (3) in place. Remove the
Bed Frame (4) from the base by lifting up on the Bed Frame (4) until the Pivot Arms (5) come out of
the arm slots located at the top of the Rear U-Frame (2), (Make sure the Strap is not attached to the
Bed Frame before attempting to remove it.) Push up on the center of the Folding Arms (8) and push
the Front and Rear U-Frames (1, 2) together until they meet. Now the machine is ready to be
stored, allowing you to unfold it quickly and easily whenever you want to use it.
Summary of Contents for 5214
Page 5: ...4 WARNING LABEL PLACEMENT ...
