3. SPECIFICATIONS
4. TERMINALS PURPOSE
Computer Interface: .......................................................................USB 2.0 (CDC/HID)
Max. distance from a PC: .....................................................................................1.8 m.
Consumption current from a USB port: ..............................................................100 mA.
Consumption current with reader attached: ....................................................≤ 450 mA.
Maximum allowed consumption current from a 12 V converter: .........................150 mA.
Supported protocols: ......................................................................... iButton, Wiegand.
Bit width of Wiegand protocol: ...............................................................................Auto.
Casing material: .................................................................................................Plastic.
Dimensions, mm: .......................................................................................64 x 64 x 19.
Gross weight: .......................................................................................................150 g.
Device dimensions are presented in Figure:
64
6
4
19
58
58
5
+12V
Power output for external devices
GND
Ground, power (-)
DAT A 0
iButton DATА0 for W iegand
DAT A 1
iButton DATA1 for W iegand
LED G
Green LED ex ternal c ontrol
by c omm ands from PC
LED R
Red LED external control
by c omm ands from PC
BEEP
Buzzer ex ternal control
by c omm ands from PC
POWER
M12 V output to power
external
devices
by
com mands
from PC
page 2
Z-2 BASE
www.ironlogic.me
