7. PROGRAMMING VIA SOCKET 1
CONNECTOR
7.1. Connecting a Z-5R.
To work directly with standalone controllers'
memory, this adapter has a connector called
Socket 1. The Socket 1 connector provides power
to the connected controller and enables the data
interchange with its memory by means of BaseZ5R
software.
The Socket 1 terminals have a life of about 200
connections. Best practice is to fit an additional
connector to the Socket 1, or use it only when it is
impossible to program the controller via DATA0 and
GND terminals.
Both Z-5R and Matrix-II K controllers have a
symmetric service pin connector for adapter
connection via Socket 1.
The Figure shows how to connect a Z-5R controller
to this adapter. Connection is possible at any time.
Z-2 BASE
5
Socket 1
Z-5R
pin
connector
Matrix II K
5
Z
-5
R
page 4
Z-2 BASE
www.ironlogic.me
