+5V
Fl ashi ng green LED m eans that
the dev ice i s powered f rom a
USB port and operati ng normally.
+12V
Red LED denotes the correct
+12 V conv erter oper ation.
POWER
Red LED denotes that +12 V is
being fed to POW ER output.
5. VISUAL INDICATION
6. COM-Port EMULATION OPERATION
Note:
COM port settings:
- Baud rate: 19,200 baud
- Data bits: 8
- Parity bits: None
- Stop bits: 1
- Flow control: None
ASCII commands:
Control commands may change if the firmware is changed.
I
Adapter Informati on.
R
iButton™ Card R e-read.
A и Z
Set and Clear +12 V on POW ER
output.
S и X
Set Low (0 V) and High (+5 V)
lev el s of BEEP signal.
D и C
Set Low (0 V) and High (+5 V)
lev el s of LED R si gnal .
F и V
Set Low (0 V) and High (+5 V)
lev el s of LED G signal.
page 3
Z-2 BASE
www.ironlogic.me
