8
Copyright 2019 Iron Bow Technologies
Assembly on a monitor
Attach the MedView to the MEDVIEW-BRKT100-A01 bracket
1.
Position the MedView so it is facing down, with the hole pattern on the bottom exposed
.
DO NOT REST THE UNIT ON THE CAMERA
a.
Attach the MedView to the MEDVIEW-BRKT100-A01 bracket using the (2) M4x8 Phillips
flathead screws and/or the (1) ¼-20 x 3/8” flathead screw.
b.
The unit can be adjusted forward and back to suit the situation, with 4 sets of holes available
for positioning. Use the (2) M4 flathead screws to lock the MedView parallel to the monitor
face.
c.
If it is necessary to install the MedView so it it not parallel to the monitor face, the ¼-20
screw can be used alone and will allow the unit to be angled as needed.
Figure 3 - Assemble MedView to Bracket
