12
Copyright 2019 Iron Bow Technologies
Assembly on a security camera mount (without an attached monitor)
While not common, the MedView
can be mounted to a ¼-20 threaded
video camera mount. A non-rotation
pin hole is included in the MedView
base plate.
Connections
The base MedView includes an AC power inlet, an Ethernet port for connecting to a wired
network, several USB 3 ports for connecting external devices including a
keyboard/mouse, which may be required for setting up the MedView system.
1.
Power Cable (supplied)
2.
Serial Port (future use)
3.
Speaker Output – for adding external powered audio speaker(s). The external
speaker(s) will replace the built-in speaker system.
4.
Microphone in – for adding an external microphone for local audio pickup. Will
disable two of the four internal microphones.
5.
WiFi Antenna – WiFi is not recommended for fixed location installations, but can
be configured to work with the MedView if necessary.
6.
Ethernet Port 1 – recommended connection to the local LAN/WAN (6’ cable
included in the kit)
7.
Ethernet Port 2 – not currently used
8.
DisplayPort 1 – install DisplayPort to HDMI cable (provided) to monitor or to a
signal priority device (ex. ACC-HDMISWITCH-A01)
9.
DisplayPort 2 – not used
10.
(4) USB 3.0 ports – use for special equipment
a.
Keyboard/mouse for system setup
b.
Spider Audio option (ACC-AUDIO-SPDR-A01)
Figure 9 - Connection Ports
Figure 8 - Assemble MedView on a post mount
