Copyright 2018 Iron Bow Technologies
10
Waking Up the CLINiC
The system goes to sleep after two hours with no activity. This value can be changed
from the web interface to the codec (see
CLINiC Administration
).
To wake up the CLINiC:
Press any button on the integrated control panel. If you are using the optional
remote, press any button on the remote or just move the remote.
Powering Off the CLINiC
Powering off the CLINiC is typically unnecessary. Most video endpoints remain
connected to the network and in stand-by mode until a call is placed or received.
However, you may need to power off the CLINiC if you need to change out the
connected peripherals or if you need to move the CLINiC to a new room.
To power off the CLINiC:
Disconnect the CLINiC from AC power.
To power off only the CLINiC codec:
Touch and hold the power sensor. Release the power sensor when the light
indicator changes color.
Restarting the CLINiC
You can restart the CLINiC by powering off and powering on the CLINiC codec.
To restart the CLINiC:
Touch and hold the power sensor. Release the power sensor when the light
indicator changes color and wait until the codec is off.
Touch and hold the power sensor again to restart the codec.
