12
Adjusting N/R rotation and yarn separation
Ref. no. 31-8939-0201-05/1805
1131 X2
N/R Rotation and Yarn Separation Adjustment
C
B
E
A
D
This adjustment is carried out by locking the inclined hub in position and then revolving the winding disc in
a clockwise or anti-clockwise direction.
Proceed as follows:
1. Insert a three millimeter socket key (or similar object) into the hole (A) in the cone at the front of
the spool body.
2. Whilst asserting a slight inward pressure on the key, revolve the winding disc until the key is felt to
lock into position.
3. Firmly grasp the spool body* and rotate the winding disc in the required direction. For normal
rotation rotate the winding disc in a clockwise direction and for reversed rotation in an anti-clockwise
direction. The more the winding disc is rotated the larger will be the yarn separation.
4. Point B on the front plate is the reference point for adjusting separation. When point C is aligned
with B the yarn separation is set at zero. By aligning D or E with B the yarn separation is set at
maximum.
Do not set a larger yarn separation than necessary for the yarn count being used.
* Failure to hold the spool body in position when adjusting yarn separation will result in damage to the
stopper magnet pin.
(mark hidden behind
stopper housing)
