IRIS Eyz-On CVR, User Manual

Page: 13 / 61

Eyz-On
CVR
User Guide
21214 13 Eyz-On
CVR
User Guide
Reverse Logic
The default condition for the Eyz-On is to detect a contact closure on the alarm
inputs, but the Eyz-On can be configured to detect an alarm input open
condition. In this case the normal (not alarmed) state would be to use a N.C.
(normally closed) switch or relay. When the
Eyz-On detects that the alarm
inputs are NOT closed for a minimum of 1 second an alarm input event will
occur.
This reverse logic option is not configurable through the Web Interface, but
requires a modification to the
Eyz-On configuration file.
Trigger Events
The
Eyz-On system has the following event triggers:
•
Alarm Input
•
Motion Detection
•
Network Down
•
Remote Alarm Message
Each of these events can specify a unique notification to happen when the
trigger is detected; i.e., record video, send email, etc., as determined by the
event trigger page. Trigger Events are continuously monitored as long as the
system is operational and modified based on the Schedule.
A Trigger Event is defined by the monitored event changing state. Motion
Detection is determined on a frame by frame basis, so constant motion in the
video stream will continuously trigger motion detection.
When a Trigger Event happens, it can cause the following to occur as defined by
the various HTML page settings:
Record Video - The number/length of images saved as defined in the time
setting on specific event page. (Implies recording to the on-board micro-SD
card.)