Iris Innovations IRISx460, Quick Start Manual

Page: 8 / 20

Iris Innovations
How to fit Field Installable
Waterproof RJ45 Jacket
When installing in an external location, or any position that
will be prone to moisture ingress or harsh weather, it is
important the the waterproof RJ45 connector (supplied) is
used to protect the cameras connections.
!
Method
Step.1:
Feed the plug-less network cable (7) through the lock nut
(6), waterproof rubber gasket (5) (ensuring the rubber
gasket inset ridge faces the end-cap (4).
Step.2:
Crimp an RJ45 Network plug (3) onto the end of the cable
in accordance with the diagram below, taking care to
ensure the wires are terminated in the correct order and
are not crossed.
Step.3:
Place the O Seal (2) onto the end of the cameras network
interface socket (1).
Step.4:
Insert the network plug (3) into the cameras network
interface socket (1).
Step.5:
Insert the waterproof rubber gasket (5) into the waterproof
end-cap (4) and secure lock nut (6) with the waterproof
end cap (4).
Step.6:
Align the snap on waterproof end-cap (4) with the notch on
the cameras network interface socket (1) and then secure
the waterproof end-cap (4) to the cameras network
interface socket (1).
Part No Description
1 Cameras Network Interface Socket
2 O Seal
3 RJ45 Network Connector
4 Waterproof Endcap
5 Rubber Gasket
6 Lock Nut
7 Network cable to Router / Switch / Hub / etc..
IRISx460 User Guide v2.3 April 2021
8
Pin No Wire Colour
1 White / Orange
2 Orange
3 White / Green
4 Blue
5 White / Blue
6 Green
7 White / Brown
8 Brown